The SEW 9010UO is a low resistance micro-ohmmeter suitable for field use or maintenance, which is designed to measure low resistance to a resolution of 0.1μΩ at a test current of 10A. This instrument utilises a four wire kelvin method of testing, allowing accurate measurements to be made at very low resistances. The SEW 9010UP is housed in a compact, yet rugged field case for portability and its built in high capacity rechargeable battery allows the user to undertake an extended number of tests on a single charge. The bright four line LCD display gives testing information to the operator, including date, time, current setting, resistance range setting as well as the actual test current being applied from the meter and the resistance reading. Up to 200 measurements can be saved in the onboard memory for recalling later.

The 9010 UO can measure resistance of up to 200Ω in seven ranges with an accuracy of as little as 1% +4 dgts and an output current of 10mA up to 10A for the lowest resistance readings. The 9010 UO offers an economical solution to micro-ohm testing and unlike a milli-ohmmeter, the micro-ohmmeter can read much lower resistance and uses a much higher 10A output current for higher accuracy at the low end of the scale.

The SEW 9010 UO is supplied complete with kelvin clamp test leads, mains charger, instruction manual and shoulder belt.

Key Features:

• 4-Wire method for accurate μΩ and mΩ readings.
• Includes Kelvin Clamp test probes
• 10A output offers 200.0μΩ range with 0.1 μΩ resolution
• 10A, 1A, 100mA and 10mA test ranges
• Large four line LCD Display(2.6 × 1.3 Inch)
• Store up to 200 measurement results internally
• High capacity rechargeable Battery
• Low battery indication
• Auto power off
• Meets Safety Standards EN 61010-1 and EN 61325-1